Calf Puller
This calf puller is used to assist in the delivery of a calf during the birthing process. It is a mechanical device that attaches to the calf, and is used to apply traction to help guide the calf out of the birth canal.
7'x24' Calf Shelter
This calf shelter is meant for about 30 calves. It has a curved roof design that makes it less likely to be tipped by the wind, a skylight to brighten the interior and make it more inviting for calves, and a door designed on the side to be inviting and keep calves closer to their mother. Common Sense has windbreaks and lifthooks available ,which are sold separately.
Dimensions:5' tall x 7' deep x 24' long
Net Weight:1500 lbs.
Warranty:1 year
Features & Benefits:Curved roof makes shelter less likely to tip
Specs:4" x 4" x 3/16" square tube steel frame
2' x 4' 14 gauge skids
2' x 2' 14 gauge hoops
26 gauge galvanized tin covering
11’ wide x 30” tall front opening
Dimensions:5' tall x 7' deep x 24' long
Net Weight:1500 lbs.
Warranty:1 year
Features & Benefits:Curved roof makes shelter less likely to tip
Specs:4" x 4" x 3/16" square tube steel frame
2' x 4' 14 gauge skids
2' x 2' 14 gauge hoops
26 gauge galvanized tin covering
11’ wide x 30” tall front opening
7'x12' Calf Shelter
This calf shelter is meant to be for about 15 calves. It has a curved roof design that makes it less likely to be tipped by the wind, a skylight to brighten the interior and make it more inviting for calves, and a door designed on the side to be inviting and keep calves closer to their mother. Common Sense has windbreaks and lifthooks available, which are sold separately.
Dimensions:5' tall x 7' deep x 12' long
Net Weight:900 lbs.
Warranty:1 year
Features & Benefits:Curved roof makes shelter less likely to tip
Specs:4" x 4" x 3/16" square tube steel frame
2' x 4' 14 gauge skids
2' x 2' 14 gauge hoops
26 gauge galvanized tin covering
5’8” wide x 30” tall front opening
Dimensions:5' tall x 7' deep x 12' long
Net Weight:900 lbs.
Warranty:1 year
Features & Benefits:Curved roof makes shelter less likely to tip
Specs:4" x 4" x 3/16" square tube steel frame
2' x 4' 14 gauge skids
2' x 2' 14 gauge hoops
26 gauge galvanized tin covering
5’8” wide x 30” tall front opening
Lifthooks for Calf Shelter
These lifthooks bolt on top of the Common Sense calf shelter so that it can be lifted with a tractor bucket. No chains are required and even in the dead of winter the calf shelter is easy to move. These lifthooks can be added to older shelters and are also designed to work on the portable windbreak.
Dimensions:24" tall x 10" wing on each side
Net Weight:28 lbs each
Warranty:1 year
Features & Benefits:make a calf shelter easy to move with loader bucket
Specs:Made out of 3 1/2" x 2 1/2" x 3/16" tubing.
Bolts on top of calf shelter. Sold in sets of two.
Dimensions:24" tall x 10" wing on each side
Net Weight:28 lbs each
Warranty:1 year
Features & Benefits:make a calf shelter easy to move with loader bucket
Specs:Made out of 3 1/2" x 2 1/2" x 3/16" tubing.
Bolts on top of calf shelter. Sold in sets of two.
7'x24' Windbreak
This is not a freestanding windbreak. It is a recommended attachment to a Common Sense calf shelter on each or either side of the shelter in order to protect cattle against harsh winds and keep cows in an area where you want your calves to be. It can also be used on an existing fenceline by chaining it to your posts.
Dimensions:7' tall x 24' long
Net Weight:400 lbs.
Country of Origin:Made in the USA
Warranty:1 year
Features & Benefits:Quick, easy, portable protection of livestock
Specs:2"x2" 14 gauge square tubing frame
26 gauge galvanized tin
Dimensions:7' tall x 24' long
Net Weight:400 lbs.
Country of Origin:Made in the USA
Warranty:1 year
Features & Benefits:Quick, easy, portable protection of livestock
Specs:2"x2" 14 gauge square tubing frame
26 gauge galvanized tin
8'x24' Portable Windbreak
Dimensions: 8'x24' with 11' removable legs
Net Weight:. 650 lbs
Warranty: 1 year
Features & Benefits: This windbreak is durable, portable, and will stand on its own. There
are 2 chains and latches on each end to attach multiple windbreaks
together or attach to a calf shelter, or post. There is 4 separate
attachment points for legs to enable a 90 degree corner. We use 7
vertical sheets to allow for better air quality on the down wind side of
the windbreak, and when in the shade position it allows for less heat
retention under the shade.
Specs: 2-1/2x 2 1/2 11 gauge square tubing frame; sheeted with 7
vertical sheets of 24 gauge high tensile tin
Net Weight:. 650 lbs
Warranty: 1 year
Features & Benefits: This windbreak is durable, portable, and will stand on its own. There
are 2 chains and latches on each end to attach multiple windbreaks
together or attach to a calf shelter, or post. There is 4 separate
attachment points for legs to enable a 90 degree corner. We use 7
vertical sheets to allow for better air quality on the down wind side of
the windbreak, and when in the shade position it allows for less heat
retention under the shade.
Specs: 2-1/2x 2 1/2 11 gauge square tubing frame; sheeted with 7
vertical sheets of 24 gauge high tensile tin
8' x 24' Portable Wind Shade
This is very similar to our portable wind break but has framework designed to be converted into a sun shade for summer use.
Dimensions: 8' tall x 24' long with 8' removable legs
Net Weight: 740 lbs.
Warranty:1 year
Features & Benefits: This windbreak can be easily converted into a shade. We add tubes with
set bolts on 2 points at top and bottom and you use the legs for
windbreak position and we supply 2 additional tubes for putting in the
shade position. It can be set as high as 10' high. The 7 vertical sheets
of tin helps with less heat retention under the shade.
* If you have the old windbreaks we can sell you the hardware to turn
any windbreak into a shade.
Specs: 2-1/2" x 2-1/2" 11 gauge square tubing frame; Sheeted with 7 vertical sheets of 24 gauge high tensile tin
Dimensions: 8' tall x 24' long with 8' removable legs
Net Weight: 740 lbs.
Warranty:1 year
Features & Benefits: This windbreak can be easily converted into a shade. We add tubes with
set bolts on 2 points at top and bottom and you use the legs for
windbreak position and we supply 2 additional tubes for putting in the
shade position. It can be set as high as 10' high. The 7 vertical sheets
of tin helps with less heat retention under the shade.
* If you have the old windbreaks we can sell you the hardware to turn
any windbreak into a shade.
Specs: 2-1/2" x 2-1/2" 11 gauge square tubing frame; Sheeted with 7 vertical sheets of 24 gauge high tensile tin
